|
MM 18mm Comb Wrench
Master Mechanic, 18 mm Combination Wrench, Hang Tag.
View Details
|
549865 |
MM 18mm Comb Wrench |
1 |
11.49 |
/ EA |
M6118M |
|
|
4-1/2x7/8 80G Flap Disc
4-1/2" x 7/8", 80 Grit Zirconia Flap Disc, Zirconia Grit Enables 3 Times Faster Material Removal Than Fiber Resin Metal Sanding Discs, The Abrasive Cloth Provides Up To 15 Times Longer Life, Fiberglass Backing Provides Optimal Grinding Angle Of 10 To 25 Degree.
View Details
|
550426 |
4-1/2x7/8 80G Flap Disc |
1 |
11.99 |
/ EA |
DW8309 |
|
|
4-1/2x7/8 120G FlapDisc
4-1/2" x 7/8", 120 Grit Zirconia Flap Disc, Zirconia Grit Enables 3 Times Faster Material Removal Than Fiber Resin Metal Sanding Discs, The Abrasive Cloth Provides Up To 15 Times Longer Life, Fiberglass Backing Provides Optimal Grinding Angle Of 10 To 25 Degree.
View Details
|
550657 |
4-1/2x7/8 120G FlapDisc |
1 |
11.99 |
/ EA |
DW8310 |
|
|
4x36 120G SandBelt
Gator Grit, 4" x 36", Fine 120 Grit, Bi-Directional Fine Sanding Belt.
View Details
|
551580 |
4x36 120G SandBelt |
2 |
7.29 |
/ EA |
3190 |
|
|
4x36 80G SandBelt
Gator Grit, 4" x 36", Medium 80 Grit, Bi-Directional Fine Sanding Belt.
View Details
|
551598 |
4x36 80G SandBelt |
1 |
7.29 |
/ EA |
3191 |
|
|
4x36 50G SandBelt
Gator Grit, 4" x 36", Coarse 50 Grit, Bi-Directional Fine Sanding Belt.
View Details
|
551606 |
4x36 50G SandBelt |
3 |
7.29 |
/ EA |
3192 |
|
|
4-1/2x5/8 80G Flap Disc
4-1/2" x 5/8"-11, 80 Grit Zirconia Flap Disc, Zirconia Grit Enables 3 Times Faster Material Removal Than Fiber Resin Metal Sanding Discs, The Abrasive Cloth Provides Up To 15 Times Longer Life, Fiberglass Backing Provides Optimal Grinding Angle Of 10 To 25 Degree.
View Details
|
552364 |
4-1/2x5/8 80G Flap Disc |
1 |
9.99 |
/ EA |
DW8313 |
|
|
150' Glo Lime Flag Tape
150', Glo Lime, Flagging Tape, Bright Lime Weatherproof Poly Vinyl Chloride For Harsh Outdoor Conditions & High Visibility, Constructed Of Non Adhesive & Non Conductive Vinyl, 1-3/16" Wide, 3mm Thick.
View Details
|
555573 |
150' Glo Lime Flag Tape |
13 |
3.29 |
/ EA |
17001 |
|
|
20OZ Milled Rip Hammer
20 OZ Milled Face Rip Hammer, With 16" Fiberglass Handle.
View Details
|
555920 |
20OZ Milled Rip Hammer |
3 |
33.99 |
/ EA |
VN10538 |
|
|
3/16" 80G Flapwheel
3/16", 80 Grit Flapwheel, For Grinding & Polishing Flat Or Contoured Surfaces On Metal, Wood, Rubber Or Plastic, As Flaps Wear Down New Abrasive Is Exposed.
View Details
|
558582 |
3/16" 80G Flapwheel |
1 |
8.49 |
/ EA |
504 |
|
|
5/64" Diamond WHL Point
5/64" Diamond Wheel Point, Diamond Particle Covered Bit, For Detail Work, Cutting, Engraving, Carving, Touch Up & Finishing, Use On Wood, Jade, Ceramic, Glass, Hardened Steel, Semi-Precious Stones & Other Hard Materials, New 1/8" Shank.
View Details
|
560477 |
5/64" Diamond WHL Point |
2 |
12.49 |
/ EA |
7134 |
|
|
Diamond WHL Point Set
Diamond Wheel Point Set, Contains #7103 & #7144 Diamond Wheel Points, Diamond Particle Covered Bits, For Detail Work, Cutting, Engraving, Carving, Touch Up & Finishing, Use On Wood, Jade, Ceramic, Glass, Hardened Steel, Semi Precious Stones & Other Hard Materials, New 1/8" Shank.
View Details
|
560485 |
Diamond WHL Point Set |
1 |
19.99 |
/ EA |
7150 |
|
|
Tungsten Carb Cutter
Tungsten Carbide Cutter, 1/8" Diameter With 1/8" Shank, Carbide Is The Next Hardest Material To Diamonds, Used For Shaping, Smoothing & Material Removal, Use On Hardened Steel, Stainless Steel, Cast Iron, Non Ferrous Metals, Fired Ceramics, Plastics, Hardwoods & Other Hard Materials, Do Not Run In Excess Of 35,000 RPM.
View Details
|
566987 |
Tungsten Carb Cutter |
1 |
12.99 |
/ EA |
9901 |
|
|
Tungsten Carb Cutter
Tungsten Carbide Cutter, 1/8" Diameter With 1/8" Shank, Carbide Is The Next Hardest Material To Diamonds, Used For Shaping, Smoothing & Material Removal, Use On Hardened Steel, Stainless Steel, Cast Iron, Non Ferrous Metals, Fired Ceramics, Plastics, Hardwoods & Other Hard Materials, Do Not Run In Excess Of 35,000 RPM.
View Details
|
566995 |
Tungsten Carb Cutter |
2 |
12.99 |
/ EA |
9903 |
|
|
24" Fatmax YEL Bar
24", Fatmax, Yellow Powder Coated Paint, Bar, Extra Wide Handle For Increased Strength & Leverage, Separate Slot For Pulling Nails.
View Details
|
570483 |
24" Fatmax YEL Bar |
4 |
17.99 |
/ EA |
55-102 |
|
